?lan-mate?series 10/100 base-t rj45 1 x 1 integrated magnetics connector bothhand usa 10/100 base-tx magnetics page 1 of 4 bothhand usa z rj-45 needs to be matched fcc standard. z complies with requirement of ieee802.3u standards. z rj-45 connector integrated with transformer/impedance resistor/high voltage capacitor. z size same as rj-45 connector to save pcb board space. z reduced emi radiation to improve emi performance. z design for 10/100 base transmission over utp-5 cable. z includes integrated 2 leds(option). z led signal leads are isolated from the ethernet signal leads to reduce emi and cross talk. z compliance with rohs requirements. z operating temperature range: 0 j to +70 j . z storage temperature range: -25 j to +85 j. s t electrical specifications @ 25 j turns ratio (5%) insertion loss (db max) part number tx rx ocl (uh min) @ 100 khz/0.1v with 8ma dc bias c w/w (pf max) l.l (uh max) 0.3-100mhz hi-pot (vrms) klu1s041-34 lf 1ct:1ct 1ct:1ct 350 28 0.4 -1.15 1500 klu1s041a C43 lf 1ct:1ct 1ct:1ct 350 28 0.4 -1.15 1500 klu1s041c-34 lf 1ct:1ct 1ct:1ct 350 28 0.4 -1.15 1500 klu1s041cm-43 lf 1ct:1ct 1ct:1ct 350 28 0.4 -1.15 1500 klu1s041cx-34 lf 1ct:1ct 1ct:1ct 350 56 0.5 -1.15 1500 klu1s041f -43 lf 1ct:1ct 1ct:1ct 350 28 0.4 -1.15 1500 klu1s041x-43 lf 1ct:1ct 1ct:1ct 350 56 0.5 -0.8 1500 klu1s516-34 lf 1ct:1 1ct:1ct 350 28 0.4 -1.15 1500 klu1t516e1-43 lf 1ct:1 1ct:1ct 350 -- -- -1.15 1500 continue return loss (db min) cross talk (db min) cmr (db min) number 30mhz 40mhz 50mhz 60mhz 80mhz 0. 3-30mhz 30-60mhz 60-100mhz 1-30mhz 30-60mhz 60-125mhz klu1s041-34 lf -16 -14 -13.5 -13 -10 -40 -35 -30 -30 -25 -20 klu1s041a C43 lf -16 -14 -13.5 -13 -10 -40 -35 -30 -30 -25 -20 klu1s041c-34 lf -16 -14 -13.5 -13 -10 -40 -35 -30 -30 -25 -20 klu1s041cm-43 lf -16 -14 -13.5 -13 -10 -40 -35 -30 -30 -25 -20 klu1s041cx-34 lf -16 -14 -13.5 -13 -10 -40 -35 -30 -30 -25 -20 klu1s041f -43 lf -16 -14 -13.5 -13 -10 - 40 -35 -30 -30 -25 -20 klu1s041x-43 lf -16 -14 -13.5 -13 -10 - 40 -35 -30 -30 -25 -20 klu1s516-34 lf -16 -14 -13.5 -13 -10 - 40 -35 -30 -30 -25 -20 klu1t516e1-43 lf -16 -14 -13.5 -13 -10 - 40 -35 -30 -30 -25 -20 for customized parts or more detailed information, please log on www.bothhandusa.com or write to sales@bothhandusa.com 132 tel: 978-887-8050 fax: 978-887-5434 e-mail : sales@bothhandusa.com http://www.bothhandusa.com
?lan-mate?series 10/100 base-t rj45 1 x 1 integrated magnetics connector bothhand usa 10/100 base-tx magnetics page 2 of 4 bothhand usa mechanicals klu1sxxxx-xx lf 1. plastic material : thermoplastic (ul 94v-0), black housing 2. metal shield : brass, 20u " inches thick nickel 3. spring wire : 0.45mm dia. phosphor bronze with 0.1524 *10 -6 m gold plated & 1.524* 10 -6 m thick nickel 4. solder pin : 0.5x0.35mm, sus430 with solder plated 5. durability : 750 mating cycles min. pcb layout mounting hole (top view) klu1sxxxx-xx lf 133 tel: 978-887-8050 fax: 978-887-5434 e-mail : sales@bothhandusa.com http://www.bothhandusa.com
?lan-mate?series 10/100 base-t rj45 1 x 1 integrated magnetics connector bothhand usa 10/100 base-tx magnetics page 3 of 4 bothhand usa specification packing manner q?ty per tube/reel q?ty/ inner box q?ty/ carton klu1sxxx lf tube 30 480 1920 klu1txxx lf tube 26 416 1664 schematics klu1s041-34 lf klu1s041a ?43 lf klu1s041c-34 lf klu1s041cm-43 lf klu1s041cx-34 lf klu1s041f -43 lf klu1s041x-43 lf klu1s516-34 lf 134 tel: 978-887-8050 fax: 978-887-5434 e-mail : sales@bothhandusa.com http://www.bothhandusa.com
?lan-mate?series 10/100 base-t rj45 1 x 1 integrated magnetics connector bothhand usa 10/100 base-tx magnetics page 4 of 4 bothhand usa part numbering system example bhjack part number: k l u 1 s 041 -xx lf na?d md ?oc tab down rj-45 jack 100 base (802.3u) number of parts 1 : single port shield type s: standard shield t: with spring tab on top and side d: spring tab on side e: spring tab on top for different circuit led options rohs klu1t516e1-43 lf 135 tel: 978-887-8050 fax: 978-887-5434 e-mail : sales@bothhandusa.com http://www.bothhandusa.com
|